MPO/MTP Pre-terminated Patch Cord
Email:sales-usa@everprox.com
Phone:+1 408-320-2181
× close

MPO/MTP Pre-terminated Patch Cord

+
-
Product Advantages
  • Comply with TIA/EIA-568-C.3 and ISO/IEC 11801 relevant standards
  • Pre-terminated connector (MTP) conforms to IEC-61754-7 and YIA/EIA-604-5(FOCIS 5) definition
  • Adopt LSZH outer jacket, flame retardant meets IEC 60332-3, gas emission meets IEC 60754-2, LSZH emission meets IEC61034-2 Standard
  • PO-LC branch jumper splits MPO connector of backbone optical cable into single-core or dual-core LC interfaces, which can provide different fan-out lengths and facilitate equipment connection.
  • Bending-resistant optical cable design can allow smaller bending radius of optical cable. It is safer and more reliable for wiring in equipment area and small space in the rack.
  • MTP parts and oval springs are used in the connector to ensure uniform stress on the optical fiber to avoid damage. The head end of male pin is oval. It does not deform after 500 times of plugging and unplugging, thus ensuring the plugging and unplugging accuracy.
Product Specs
Parameter Item Specification Value
Optical Fiber OM3/OM4/G652D/G657A2 and so on can be selected
Outer Diameter of Cable 3.0±0.1mm
Attenuation of Connector ≤0.35dB
Return Loss ≥25dB
Bend Radius (Static/Dynamic) 10×OD/20×OD
Material Compliance RoHS
Operating Temperature -20℃~60℃